Click for more products.
No produts were found.
Click for more products.
No produts were found.

SWITCHED PRESSURE SWITCH 1/8"

1/8" switched pressure switch with T-15 connector.

It is an electromechanical device used to detect changes in the pressure of a fluid (air or liquid) and activate or deactivate an electrical circuit in response to these changes.

Applications: industrial automation, pneumatics, hydraulics, refrigeration, heating.

Data sheet:

  • Adjustable from 1-12 bar.
  • Normally closed or open position depending on the cable connection.
  • Pressure regulation using Allen screw.
  • Suitable for water/oil.
  • Accuracy of 4% of pre-set pressure.
  • Hysteresis 10%
  • Max pressure at entrance 25 bar.
  • Max intensity AC 0.5 A (250V) DC 0.15 A (110V)
  • Protection IP-54
  • Working temperature -20/50ºC

Buy online SWITCHED PRESSURE SWITCH 1/8" at the best price

€43.56 (tax included)
€36.00 (tax excl.)
Reference:
4347
Consult price for large quantities
Description

1/8" switched pressure switch with T-15 connector.

Product Details
4347
12 other products in the same category:
€10.14 (tax excl.)
€12.27 (tax included)
Filter with integrated tap for timed drains Integrated maintenance valve double entry 1/2-1/4 BSP thread
€17.55 (tax excl.)
€21.24 (tax included)
Stainless steel 316 PN63 2-way manual ball valve with ISO-5311 plate for mounting with actuators Body, ball, lever and shaft made of stainless steel-316 Teflon closure ring. Security closure and padlock. Temperature...
€94.46 (tax excl.)
€114.30 (tax included)
Manual ball valve by lever in two pieces Inox-316 Gasket and seats in PTFE ANSI B-16.5 Flange S-150 LBS Pressure 150 pounds Temperature -30 / 180ºC Possibility of mounting actuator based on ISO-5211.
€4.57 (tax excl.)
€5.53 (tax included)
Threaded valve with outlet to instant fitting. Materials: Brass UNI EN 12164 / 12165 and polymer handles. Pressure: Maximum 20 bar Temperature: -20 ÷ 80º C
€51.60 (tax excl.)
€62.44 (tax included)
Wafer type manual butterfly valve with stainless steel disc, has as an option, flange for mounting on ISO-5011 actuator EPDM gasket PN-16 DIN PN10-16 ANSI 125-150 Max. temperature 120ºC Flange for mounting on ISO-5011...
€6.30 (tax excl.)
€7.62 (tax included)
Brass safety valve for water. Rubber closure. Max. temperature 100ºC Female thread. Tarred at 6 bar.
€43.88 (tax excl.)
€53.09 (tax included)
NPT thread needle valve Built on I-316. Graphite packing + PTFE Blue painted aluminum steering wheel. Working pressure 210 bar. Temperature -20ºC / 250ºC
€13.36 (tax excl.)
€16.17 (tax included)
Full bore NPT threaded three-piece ball valve.Made of WCB carbon steel Threaded ends DIN-2999 Std. It incorporates a lever locking system. Seats and gaskets in PTFE (15% fiberglass) Max working pressure 1000 WOG...
€5.40 (tax excl.)
€6.53 (tax included)
PTFE ball joint Nickel-plated brass body. O-RING O-ring in NBR 70 Chromed brass shaft Chromed brass dial Working pressure -0.99 / 25 Bar. Temperature -20º / 80º Short zinc-plated steel lever
€8.98 (tax excl.)
€10.87 (tax included)
Stainless steel 316 material. Filtration degree 1 mm. Stainless filter sieve Possibility of changing the filter element. Temperature -30ºC / 280ºC. Pressure 40 bar.
€8.85 (tax excl.)
€10.71 (tax included)
Anodized slide. Nickel-plated brass body. Discharge to 3/2-way drive.
€12.83 (tax excl.)
€15.52 (tax included)
3-way ball valve STEP "L" with gland nut. Made of brass UNI EN 1264/12165 and polymer handle. Temperature -10ºC / 80ºC Pressure -0.99 / 10 bar.

Menu