Click for more products.
No produts were found.
Click for more products.
No produts were found.

UNIDIRECTIONAL FLOW REGULATOR

  • Unidirectional flow regulator.
  • Anodized aluminum body
  • Brass regulation screw.
  • Working pressure from 2 to 10 bar.
  • Temperature 0ºC / 70ªC 

Buy online UNIDIRECTIONAL FLOW REGULATOR at the best price

€10.68 (tax included)
€8.83 (tax excl.)
SELECT THREAD
  • 1/8"
  • 1/4"
  • 3/8"
  • 1/2"
Reference:
15020004
Consult price for large quantities
Description

Product Details
15020004
Reference THREAD Price Add to cart
15020008 1/4"
€10.60
15020012 3/8"
€22.82
15020016 1/2"
€22.82
15020004 1/8"
€8.83
12 other products in the same category:
€22.23 (tax excl.)
€26.90 (tax included)
Stroke end sensor Detects a pressure drop by issuing a command signal (S). Especially applicable as a pneumatic limit switch in actuators, mounted directly on it, it detects the end of the stroke by emitting a pilot...
€6.30 (tax excl.)
€7.62 (tax included)
Brass safety valve for water. Rubber closure. Max. temperature 100ºC Female thread. Tarred at 6 bar.
€36.00 (tax excl.)
€43.56 (tax included)
1/8" switched pressure switch with T-15 connector. It is an electromechanical device used to detect changes in the pressure of a fluid (air or liquid) and activate or deactivate an electrical circuit in response to...
€5.40 (tax excl.)
€6.53 (tax included)
PTFE ball joint Nickel-plated brass body. O-RING O-ring in NBR 70 Chromed brass shaft Chromed brass dial Working pressure -0.99 / 25 Bar. Temperature -20º / 80º Short zinc-plated steel lever
€30.65 (tax excl.)
€37.09 (tax included)
The progressive start fitting manages to pressurize the actuator gradually, avoiding water hammer caused by rapid pressurization. Regulation is possible by means of a screw in its head. The connection is via...
€10.98 (tax excl.)
€13.29 (tax included)
Female mini stainless steel ball valve It is used to control the flow of fluids in hydraulic, pneumatic or piping systems in general. The shut-off valve is a ball that rotates inside a seat to open or close the flow...
€23.76 (tax excl.)
€28.75 (tax included)
3-way brass ball valve "T" passage with plate ISO-5211 Construction in chrome-plated brass UNE-EN 12165. PTFE seats. Steel lever. NBR gaskets. Pressure PN-25 Temperature -10/100ºC.
€21.60 (tax excl.)
€26.14 (tax included)
INOX-316 full bore ball valve in 3 pieces. Constructed of INOX-316 CF8M microfusion steel. Gaskets and seats PTFE + 15% FV Nominal Pressure PN-63 Temperature -25ºC / 180ªC. Includes ISO-5211 plate to mount with...
€9.26 (tax excl.)
€11.20 (tax included)
Bidirectional flow regulator. Anodized aluminum body Brass regulation screw. Working pressure from 2 to 10 bar. Temperature 0ºC / 70ªC 
€51.60 (tax excl.)
€62.44 (tax included)
Wafer type manual butterfly valve with stainless steel disc, has as an option, flange for mounting on ISO-5011 actuator EPDM gasket PN-16 DIN PN10-16 ANSI 125-150 Max. temperature 120ºC Flange for mounting on ISO-5011...
€28.00 (tax excl.)
€33.88 (tax included)
Unidirectional flow regulator. Available in 1/8" - 1/4" threads Working temperature -10ºC / 60 ºC Pressure 2 - 10 bar The panel mounting with the special nut, the knob knob, when turned, does not move relative to the...

Menu