Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
NG-6 MODULAR FLOW REGULATOR
NG-6 MODULAR FLOW REGULATOR
NG-6 MODULAR FLOW REGULATOR
NG-6 MODULAR FLOW REGULATOR
NG-6 MODULAR FLOW REGULATOR
NG-6 MODULAR FLOW REGULATOR

NG-6 MODULAR FLOW REGULATOR

Modular NG-6 flow regulator.

  • Flow rate 35 l/min.
  • Temperature -20 / 70ºC
  • Maximum pressure 250 bar.
  • Three regulation options, in line A, in line B and the 2 lines AB

Buy online NG-6 MODULAR FLOW REGULATOR at the best price

€90.75 (tax included)
€75.00 (tax excl.)
SELECT TYPE
  • TO
  • b
  • A-B
Reference:
49500032
Consult price for large quantities
Related products
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€39.20 (tax excl.)
€47.43 (tax included)
NG-6 base plate bottom exit It serves as a support and connection for one or more NG-6 solenoid valves. In this type of plate, the fluid inlet and outlet connections of the solenoid valves are located at the bottom....
SOLENOID VALVE NG-6 4/3 CLOSED CENTER SOLENOID VALVE NG-6 4/3 CLOSED CENTER

€47.00 (tax excl.)
€56.87 (tax included)
The NG-6 4/3 closed center solenoid valve precisely controls the flow of pressurized oil. It consists of four ports and three possible positions. In the central position, all ports are isolated, preventing fluid flow....
MODULAR NON-RETURN VALVE NG-6 MODULAR NON-RETURN VALVE NG-6

€52.50 (tax excl.)
€63.53 (tax included)
Modular non-return valve NG-6 Flow rate 35 l/min. Max pressure 250 bar Working temperature -20ºC / 70ºC
Description

REGULADOR CAUDAL MODULAR NG-6

Product Details
49500032
Reference ROADS Price Add to cart
49500033 b
€75.00
49500035 A-B
€78.75
49500032 TO
€75.00
12 other products in the same category:
REXROTH R933000030 12VDC COIL REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
Rexroth Coil R933000030 12 VDC This is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate the flow of oil in a hydraulic circuit upon receiving an electrical signal....
MODULAR NON-RETURN VALVE NG-6 MODULAR NON-RETURN VALVE NG-6

€52.50 (tax excl.)
€63.53 (tax included)
Modular non-return valve NG-6 Flow rate 35 l/min. Max pressure 250 bar Working temperature -20ºC / 70ºC
NG-6 SINGLE OVERCENTER VALVE NG-6 SINGLE OVERCENTER VALVE

€182.00 (tax excl.)
€220.22 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
NG-6 MODULAR PRESSURE REDUCER NG-6 MODULAR PRESSURE REDUCER

€168.75 (tax excl.)
€204.19 (tax included)
NG-6 modular pressure reducer Flow rate 35 l/min. Pressure range 8...70 and 35...140 bar.
NG-10 MODULAR PRESSURE REDUCER NG-10 MODULAR PRESSURE REDUCER

€217.50 (tax excl.)
€263.18 (tax included)
NG-10 pressure reducer Flow rate 70 l/min. Pressure range 8....70 and 35.....140 bar.
MODULAR NON-RETURN VALVE NG-10 MODULAR NON-RETURN VALVE NG-10

€108.75 (tax excl.)
€131.59 (tax included)
Modular non-return valve NG-10 Flow rate 70 l/min. Max pressure 250 bar. Standard temperature -30 / 80ºC
OVERCENTER VALVE (BALANCE) SINGLE NG-10 OVERCENTER VALVE (BALANCE) SINGLE NG-10

€335.00 (tax excl.)
€405.35 (tax included)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...
NG-6 MODULAR LIMITING VALVE NG-6 MODULAR LIMITING VALVE

€120.00 (tax excl.)
€145.20 (tax included)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
NG-10 MODULAR LIMITING VALVE NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
NG-10 limiting valve Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 70 l/min. Temperature -30 / 80ºC
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

€150.00 (tax excl.)
€181.50 (tax included)
The NG-6 double overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
DOUBLE OVERCENTER VALVE (BALANCE) NG-10 DOUBLE OVERCENTER VALVE (BALANCE) NG-10

€370.00 (tax excl.)
€447.70 (tax included)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...

Menu

Please sign in first.

Sign in