Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

The NG-6 double overcenter valve is used to control movement and block the actuator in both directions, performing the following functions:

  • Controlled lowering of the load that is not dragged by its weight, since the valve does not allow any cavitation of the actuator.
  • Limitation of the maximum pressure in case of shocks caused by the load, overloads or sudden maneuvers (load control with open center distributor).
  • These valves block the oil outlet of the actuator until a pilot pressure is reached in the inlet line that is inversely proportional to the load to be supported by the actuator. In this way, the load does not go into overdrive, and the speed of descent of the load corresponds to the flow controlled by the distributor.
  • In case of zero pilot pressure, the pressure necessary to open the valve corresponds to its setting, functioning as a braking valve.

Buy online DOUBLE NG-6 OVERCENTER (BALANCE) VALVE at the best price

€181.50 (tax included)
€150.00 (tax excl.)
PRESSURE
Reference:
495900
Consult price for large quantities
Related products
SIDE NG-6 BASE PLATE SIDE NG-6 BASE PLATE

€34.75 (tax excl.)
€42.05 (tax included)
CETOP-3 simple base plate for NG-6 solenoid valves Made of aluminum. Supplied without caps or screws. Side outlets 3/8" or 1/2" thread
BASE PLATE NG-6 LOWER OUTLET BASE PLATE NG-6 LOWER OUTLET

€39.20 (tax excl.)
€47.43 (tax included)
NG-6 base plate bottom exit It serves as a support and connection for one or more NG-6 solenoid valves. In this type of plate, the fluid inlet and outlet connections of the solenoid valves are located at the bottom....
SOLENOID VALVE NG-6 4/3 CENTER H SOLENOID VALVE NG-6 4/3 CENTER H

€47.00 (tax excl.)
€56.87 (tax included)
Solenoid valve NG-6 4/3 center H It is used to precisely control the flow of oil under pressure. Designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
Description

NG-6 double overcenter valve

Product Details
495900
Reference PRESSURE Price Add to cart
495900 20 - 200 Bar
€150.00
495901 35 - 350 bar
€150.00
12 other products in the same category:
NG-6 SINGLE OVERCENTER VALVE NG-6 SINGLE OVERCENTER VALVE

€182.00 (tax excl.)
€220.22 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
NG-10 MODULAR LIMITING VALVE NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
NG-10 limiting valve Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 70 l/min. Temperature -30 / 80ºC
NG-10 MODULAR PRESSURE REDUCER NG-10 MODULAR PRESSURE REDUCER

€217.50 (tax excl.)
€263.18 (tax included)
NG-10 pressure reducer Flow rate 70 l/min. Pressure range 8....70 and 35.....140 bar.
DOUBLE OVERCENTER VALVE (BALANCE) NG-10 DOUBLE OVERCENTER VALVE (BALANCE) NG-10

€370.00 (tax excl.)
€447.70 (tax included)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...
NG-6 MODULAR LIMITING VALVE NG-6 MODULAR LIMITING VALVE

€120.00 (tax excl.)
€145.20 (tax included)
NG-6 pressure limiting valve It serves to prevent a certain pre-set pressure from exceeding Pressure range 5...315 bar. (SPECIFY PRESSURE) Flow rate 35 l/min. Temperature -20ºC / 70ºC
NG-6 MODULAR PRESSURE REDUCER NG-6 MODULAR PRESSURE REDUCER

€168.75 (tax excl.)
€204.19 (tax included)
NG-6 modular pressure reducer Flow rate 35 l/min. Pressure range 8...70 and 35...140 bar.
MODULAR NON-RETURN VALVE NG-10 MODULAR NON-RETURN VALVE NG-10

€108.75 (tax excl.)
€131.59 (tax included)
Modular non-return valve NG-10 Flow rate 70 l/min. Max pressure 250 bar. Standard temperature -30 / 80ºC
REXROTH R933000030 12VDC COIL REXROTH R933000030 12VDC COIL

€20.00 (tax excl.)
€24.20 (tax included)
Rexroth Coil R933000030 12 VDC This is an electromechanical component used in hydraulic valves. Its function is to activate or deactivate the flow of oil in a hydraulic circuit upon receiving an electrical signal....
MODULAR NON-RETURN VALVE NG-6 MODULAR NON-RETURN VALVE NG-6

€52.50 (tax excl.)
€63.53 (tax included)
Modular non-return valve NG-6 Flow rate 35 l/min. Max pressure 250 bar Working temperature -20ºC / 70ºC
NG-6 MODULAR FLOW REGULATOR NG-6 MODULAR FLOW REGULATOR

€75.00 (tax excl.)
€90.75 (tax included)
Modular NG-6 flow regulator. Flow rate 35 l/min. Temperature -20 / 70ºC Maximum pressure 250 bar. Three regulation options, in line A, in line B and the 2 lines AB
OVERCENTER VALVE (BALANCE) SINGLE NG-10 OVERCENTER VALVE (BALANCE) SINGLE NG-10

€335.00 (tax excl.)
€405.35 (tax included)
The overcenter valve is used to control movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the valve does...

Menu

Please sign in first.

Sign in