Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
ELECTRONEPUMATIC DISTRIBUTOR 1/8"
ELECTRONEPUMATIC DISTRIBUTOR 1/8"
ELECTRONEPUMATIC DISTRIBUTOR 1/8"
ELECTRONEPUMATIC DISTRIBUTOR 1/8"

ELECTRONEPUMATIC DISTRIBUTOR 1/8"

1/8 electropneumatic distributor to achieve movements in the pneumatic cylinders.

  • Materials: Pilot in brass and stainless steel
  • Aluminum slide, stainless steel spring,
  • Brass bushings and NBR joints.
  • Ø Step: 5 mm
  • Flow rate: 630 nl/min (6 bar)
  • Fluids: Filtered air with or without lubrication.
  • Coil: T-15
  • Supplied without coil or connector.

DOWNLOAD TECHNICAL SHEET

Buy online ELECTRONEPUMATIC DISTRIBUTOR 1/8" at the best price

€35.09 (tax included)
€29.00 (tax excl.)
SELECT THREAD
  • 1/8"
SELECT TYPE
  • 3/2 N..OPEN
  • 3/2 N.. CLOSED
  • 3/2 FLIP-UP
  • 5/2 MONOSTABLE
  • 5/2 BISTABLE
  • 5/3 CLOSED DOCK CENTER
  • 5/3 CENTER TO DOCK EXHAUST
  • 5/3 SPRING PRESSURE CENTER
Reference:
21371128
Consult price for large quantities
Related products
T-15 COIL FOR 1/8" SOLENOID VALVES T-15 COIL FOR 1/8" SOLENOID VALVES

€4.50 (tax excl.)
€5.45 (tax included)
T15 coils for 1/8" solenoid valves . They store energy in a magnetic field through induction using a copper wire winding. T-15 coil for 1/8" solenoid valves DIN-4365 C type connector Protection class IP-65 For Ø8...
INSTANT FITTING STRAIGHT TUBE UNION CYLINDRICAL THREAD INSTANT FITTING STRAIGHT TUBE UNION CYLINDRICAL THREAD

€1.23 (tax excl.)
€1.49 (tax included)
Instant fitting straight union tube cylindrical thread WORKING PRESSURE -0.99 / 10 bar. TEMPERATURE 0 / 60ºC. WIDE RANGE OF Ø 4-16 EASE OF CONNECTION CYLINDRICAL OR CONICAL THREAD NICKEL PLATED BRASS AND PBT BODY....
PLASTIC MUFFLER PLASTIC MUFFLER

€0.98 (tax excl.)
€1.19 (tax included)
Silencer designed to prevent the loss of valve effectiveness due to clogging of the silencer element (exhaust air residue). It consists of an acetal resin chamber with micro-balls of the same material that change...
BASE PLATE FOR 1/8"-1/4" VALVES BASE PLATE FOR 1/8"-1/4" VALVES

€11.20 (tax excl.)
€13.55 (tax included)
Aluminum multiple base for housing 1/8 - 1/4 series control valves It has centralized threaded inlet and discharges. Up to 10 positions . Supplied with gaskets and fixing screws.
LED T-15 DIN-43650-C CONNECTOR LED T-15 DIN-43650-C CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
Description

Electropneumatic distributor 1/8

Product Details
21371128
Reference THREAD ROADS Price Add to cart
21371129 1/8" 5/2 BISTABLE
€42.00
21371130 1/8" 5/3 CLOSED DOCK CENTER
€52.00
21371131 1/8" 5/3 CENTER TO DOCK EXHAUST
€52.00
21371132 1/8" 5/3 SPRING PRESSURE CENTER
€52.00
21371254 1/8" 3/2 N.. CLOSED
€28.00
21371255 1/8" 3/2 N..OPEN
€28.00
21371257 1/8" 3/2 FLIP-UP
€42.00
21371128 1/8" 5/2 MONOSTABLE
€29.00
12 other products in the same category:
T-15 COIL CONNECTOR DIN-43650-C T-15 COIL CONNECTOR DIN-43650-C

€1.00 (tax excl.)
€1.21 (tax included)
Coil connector T-15 DIN-43650-C Data sheet: Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing...
SOLENOID VALVE COIL C1 SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
LED T-15 DIN-43650-C CONNECTOR LED T-15 DIN-43650-C CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
ELECTRICAL DISTRIBUTOR NAMUR CONNECTION ELECTRICAL DISTRIBUTOR NAMUR CONNECTION

€32.72 (tax excl.)
€39.59 (tax included)
A NAMUR connection electrical distributor is an electromechanical device used to connect and disconnect a pneumatic actuator to an electrical power source. NAMUR connection electrical distributors are used in a wide...
T-22 AC/DC LED CONNECTOR T-22 AC/DC LED CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....
T-22 COIL CONNECTOR DIN-43650-B T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
T-22 coil connector DIN-43650-B It is an industrial electrical connector, primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. Applications: packaging...
T22 SOLENOID VALVE COIL T22 SOLENOID VALVE COIL

€5.60 (tax excl.)
€6.78 (tax included)
T22 coils for application in 1/4" and 1/2" solenoid valves Available in the most common voltages 12VDC - 24VDC - 110VAC - 220VAC - 24VAC Protection IP-65 Connector according to DIN-43650 B Power 3W DC 5VA AC Diameter...
T-15 COIL FOR 1/8" SOLENOID VALVES T-15 COIL FOR 1/8" SOLENOID VALVES

€4.50 (tax excl.)
€5.45 (tax included)
T15 coils for 1/8" solenoid valves . They store energy in a magnetic field through induction using a copper wire winding. T-15 coil for 1/8" solenoid valves DIN-4365 C type connector Protection class IP-65 For Ø8...
BASE PLATE FOR 1/8"-1/4" VALVES BASE PLATE FOR 1/8"-1/4" VALVES

€11.20 (tax excl.)
€13.55 (tax included)
Aluminum multiple base for housing 1/8 - 1/4 series control valves It has centralized threaded inlet and discharges. Up to 10 positions . Supplied with gaskets and fixing screws.
BASE SEAL PLATE BASE SEAL PLATE

€2.00 (tax excl.)
€2.42 (tax included)
Base blanking plate is used to close and seal openings in bases or structures such as electrical boxes, control panels, electronic equipment or machinery. Its primary function is to protect internal components from...
BASE PLATE FOR 1/2" VALVES BASE PLATE FOR 1/2" VALVES

€18.20 (tax excl.)
€22.02 (tax included)
Aluminum manifold base for housing 1/2 series control valves, Up to 10 positions It has centralized threaded inlet and discharges Supplied with gaskets and fixing screws.
ELECTRONEPUMATIC DISTRIBUTOR 1/4" ELECTRONEPUMATIC DISTRIBUTOR 1/4"

€29.73 (tax excl.)
€35.97 (tax included)
1/4 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 8 mm Flow...

Menu

Please sign in first.

Sign in