€1.43
(tax excl.)
€1.73
(tax included)
Kit to join filtration elements. Supplied with screws and gasket.
BATTERY PRESSURE REGULATOR 1/4"
- The main characteristic of this type of regulator is its ability to be mounted on a battery with common power.
- At constant inlet pressure, pressure regulation is possible independently in each module.
- It is possible to use intermediate air outlets of the line using the corresponding device. Ref.: KITREP1/4BAT.
- The group can be fixed using the traditional wall support (S1/8-1/4) or with the “T” support (Ref.: S1/4T), the latter allows the battery to be distanced from the wall. Being able to locate the fitting on the back for mounting the pressure gauge on the front.
- Knob with regulation locking device.
- Built-in overpressure relief.
- Inlet pressure 16 bar.
- Regulation of 0/8 bar.
- Supplied without pressure gauge or supports.
Buy online BATTERY PRESSURE REGULATOR 1/4" at the best price
€30.79
(tax included)
€25.45
(tax excl.)
Reference:
3402
Consult price for large quantities
Related products
€5.98
(tax excl.)
€7.24
(tax included)
Dry pressure gauge Ø40 central thread 1/8 Case and rim: Carbon steel, painted Fitting: Brass 1/8” Transmission: Copper alloy Needle: Black color Dial: White lacquered aluminum Screen: Transparent Polycarbonate...
12 other products in the same category:
€25.02
(tax excl.)
€30.27
(tax included)
Compressed air pressure regulator. In order to regulate the pressure (force) of compressed air
Special preformed membrane.
Regulated pressure stability regardless of input variations.
High flow rate with reduced...
€26.59
(tax excl.)
€32.17
(tax included)
Pressure regulator with integrated pressure gauge. Flow rates from 550 to 8000 Nl/min. Regulation range 0.5 to 8.5 bar. Max. inlet pressure 10 bar. Working temperature 5 / 60 ºC
€99.40
(tax excl.)
€120.27
(tax included)
In the case of large regulators installed in places that are difficult to access, the "JRP" series pilot regulator can be used. The regulators are free of the spring and the regulation control knob, adjustment is...
€5.98
(tax excl.)
€7.24
(tax included)
Dry pressure gauge Ø40 central thread 1/8 Case and rim: Carbon steel, painted Fitting: Brass 1/8” Transmission: Copper alloy Needle: Black color Dial: White lacquered aluminum Screen: Transparent Polycarbonate...
€17.50
(tax excl.)
€21.18
(tax included)
Pressure regulator for compressed air 1/8 - 1/4 Membrane operation. Max inlet pressure 16 bar. Flow rate at 6.3 bar 360 Nl/min Very easy to assemble, thanks to its special hooking system. Usable in versions for air...
€9.76
(tax excl.)
€11.81
(tax included)
Ø40 rear thread pressure gauge with fixing flange. Painted carbon steel case and rim. 1/8" conical brass rear fitting. Internal copper alloy transmission. Black needle. Internal black lacquered aluminum dial....
€10.55
(tax excl.)
€12.77
(tax included)
Ø50 rear thread pressure gauge with fixing flange.
Painted carbon steel case and rim.
Rear fitting 1/8"-1/4" in brass.
Internal copper alloy transmission.
Black needle.
Internal black lacquered aluminum dial....
€9.83
(tax excl.)
€11.89
(tax included)
Case and rim: Carbon steel, painted Fitting: Brass 1/8” Transmission: Copper alloy Needle: Black color Dial: White lacquered aluminum Screen: Transparent Polycarbonate Tolerance: +/- 1.7% Temperature: 70 ºC IP43...
€6.05
(tax excl.)
€7.32
(tax included)
Case and rim: Carbon steel, painted Fitting: Brass 1/8” Transmission: Copper alloy Needle: Black color Dial: White lacquered aluminum Screen: Transparent Polycarbonate Tolerance: +/- 1.7% Temperature: 70 ºC IP43...
€1.87
(tax excl.)
€2.26
(tax included)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
€5.78
(tax excl.)
€6.99
(tax included)
Side thread pressure gauge 1/8 dry diameter 40 Case and rim: Carbon steel, painted Fitting: Brass 1/8” Transmission: Copper alloy Needle: Black color Dial: White lacquered aluminum Screen: Transparent Polycarbonate...
€20.00
(tax excl.)
€24.20
(tax included)
In-line pressure regulator for Ø6 and Ø8 tube, used for compressed air.
Temperature -20 / 80ºC.
Inlet pressures 2 / 10 bar.
Final regulation 1/8 bar.
Compact and panelable design.
Battery mounting possible.
