€1.20
(tax excl.)
€1.45
(tax included)
3 pin + ground connection Conductive thread max. 1 mm²
ELECTRONIC TIMER T-30
T-30 ELECTRONIC TIMER.
Programmable T-30 electronic timer for joint use with elements that have a DIN 43650 A or B type connection. It has a manual operation or “test” button, as well as selectors to adjust the desired operating or stopping time. This type of device is applied with solenoid valves for the drainage of compressor tanks such as air transport lines, pneumatic vibration transport systems (e.g. agricultural silos, aggregate silos) or automatic lubrication systems.
Data sheet:
- Battery life: 5 years
- Valve connection: DIN 43650-A ISO-4400/6952.
- ON setting time: 0.1 - 59 sec.
- OFF setting time: 0.1 - 99.59 min.
- Supply voltage: 24-240 Vac 50/60 Hz.
- I switching: 1A.
- I consumption: 4 mA.
- Operating temperature: -10ºCa + 50ºC.
- Protection degree: IP 65.
- Insulation: VDE 01101/89 Class C.
Buy online ELECTRONIC TIMER T-30 at the best price
€56.87
(tax included)
€47.00
(tax excl.)
Reference:
6015
Consult price for large quantities
12 other products in the same category:
€1.08
(tax excl.)
€1.31
(tax included)
3 pin + ground connection Conductive cable max. 0.75 mm² DIN C
€39.00
(tax excl.)
€47.19
(tax included)
The electronic automatic purge valve programs the frequency and duration of purges using an electronic timer for condensate discharge.
It works automatically and wastes less air when discharging. It adapts to any type...
€1.00
(tax excl.)
€1.21
(tax included)
Coil connector T-15 DIN-43650-C Data sheet: Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing...
€1.00
(tax excl.)
€1.21
(tax included)
T-22 coil connector DIN-43650-B
It is an industrial electrical connector, primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device.
Applications: packaging...
€4.14
(tax excl.)
€5.01
(tax included)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....
€37.84
(tax excl.)
€45.79
(tax included)
Analog timer T-22 DIN 43650-B Programmable T-22 analog timer for joint use with elements that have a DIN 43650 B type connection. This type of device is applied with solenoid valves for the drainage of compressor...
€4.14
(tax excl.)
€5.01
(tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
€1.00
(tax excl.)
€1.21
(tax included)
Coil connector T-30 DIN-43650-A It is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€12.00
(tax excl.)
€14.52
(tax included)
Rectifier connector T:30 DIN-43650 form A. Transforms alternating current to direct current Contacts: Nut with protection for conductors. Number of poles: 2 + Earth Possibility of supplying with LED Contact distance:...
€37.84
(tax excl.)
€45.79
(tax included)
T-30 Analog Timer It is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B but with some differences, it is used to control processes that...
€1.18
(tax excl.)
€1.43
(tax included)
2 pin + ground connection Conductive thread: max. 1 mm² DIN B
