€1.08
(tax excl.)
€1.31
(tax included)
3 pin + ground connection Conductive cable max. 0.75 mm² DIN C
12 other products in the same category:
€37.84
(tax excl.)
€45.79
(tax included)
Analog timer T-22 DIN 43650-B Programmable T-22 analog timer for joint use with elements that have a DIN 43650 B type connection. This type of device is applied with solenoid valves for the drainage of compressor...
€4.14
(tax excl.)
€5.01
(tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
€4.50
(tax excl.)
€5.45
(tax included)
T15 coils for 1/8" solenoid valves . They store energy in a magnetic field through induction using a copper wire winding. T-15 coil for 1/8" solenoid valves DIN-4365 C type connector Protection class IP-65 For Ø8...
€7.51
(tax excl.)
€9.09
(tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€1.00
(tax excl.)
€1.21
(tax included)
T-22 coil connector DIN-43650-B
It is an industrial electrical connector, primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device.
Applications: packaging...
€12.85
(tax excl.)
€15.55
(tax included)
Coil for solenoid valve. Inner Ø 13 mm. Power in DC 27 W. Max. temperature 180ºC. Class H insulation Connector type DIN-4365A Possibility of ordering Voltage at 72 V DC (railways)
€47.00
(tax excl.)
€56.87
(tax included)
T-30 ELECTRONIC TIMER. Programmable T-30 electronic timer for joint use with elements that have a DIN 43650 A or B type connection. It has a manual operation or “test” button, as well as selectors to adjust the...
€39.00
(tax excl.)
€47.19
(tax included)
The electronic automatic purge valve programs the frequency and duration of purges using an electronic timer for condensate discharge.
It works automatically and wastes less air when discharging. It adapts to any type...
€4.14
(tax excl.)
€5.01
(tax included)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....
€8.80
(tax excl.)
€10.65
(tax included)
Standard insulation: class “F” according to VDE 0580-0110 standard and CEI standard. Insulation on request: Class “H”. Maximum temperature: 180ºC. Construction: Fully encapsulated in 6/6 resin/nylon with fiberglass....
€37.84
(tax excl.)
€45.79
(tax included)
T-30 Analog Timer It is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B but with some differences, it is used to control processes that...
