Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
OIL SPLITER
OIL SPLITER
OIL SPLITER
OIL SPLITER
OIL SPLITER
OIL SPLITER

OIL SPLITER

The splitters distribute a uniform amount of lubricant to the exhaust points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided between 2, 3 or 4 parts and then transported to the final lubrication point.

  • Made of aluminum.
  • Ø6 inlet and outlet fittings included.
  • Working temperature up to 70ºC

Buy online OIL SPLITER at the best price

€73.69 (tax included)
€60.90 (tax excl.)
OUTPUT TYPE
  • 2 OUTPUTS
  • 3 OUTPUTS
  • 4 OUTPUTS
Reference:
7505201
Consult price for large quantities
Description

Product Details
7505201
Reference OUTPUT TYPE Price Add to cart
7505202 3 OUTPUTS
€75.40
7505203 4 OUTPUTS
€100.50
7505201 2 OUTPUTS
€60.90
12 other products in the same category:
LUBRICUS HIGH TEMPERATURE GREASE LUB-KA03 LUBRICUS HIGH TEMPERATURE GREASE LUB-KA03

€60.40 (tax excl.)
€73.08 (tax included)
PAO based PHS high temperature Lubricationcartridge Pressure 70 bar Temperature -40º / 160ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³...
LUBRICUS UNIVERSAL OIL LUB-KA14 LUBRICUS UNIVERSAL OIL LUB-KA14

€51.10 (tax excl.)
€61.83 (tax included)
VG-68 viscosity oil cartridge MINERAL base oil. Pressure 70 bar Temperature -10º / 90ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³ CHECK THE...
FAT SPLITER FAT SPLITER

€60.90 (tax excl.)
€73.69 (tax included)
The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3...
HIGH PRESSURE THREADED PIPE ELBOW UNION HIGH PRESSURE THREADED PIPE ELBOW UNION

€2.00 (tax excl.)
€2.42 (tax included)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
FLAT BRUSH WITH CENTRAL THREAD FLAT BRUSH WITH CENTRAL THREAD

€18.90 (tax excl.)
€22.87 (tax included)
Flat Lubricationbrush. Synthetic bristles. Aluminum body. For oil lubrication. Available in 4 sizes 25, 40, 70 and 100 mm. Inlet thread 1/4" female
LAT-SZ-G STRAIGHT LUBRICATION SPROCKET LAT-SZ-G STRAIGHT LUBRICATION SPROCKET

€43.70 (tax excl.)
€52.88 (tax included)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
ROUND GREASE BRUSH SAT 2034 ROUND GREASE BRUSH SAT 2034

€16.60 (tax excl.)
€20.09 (tax included)
Ø25 Lubricationbrush Bristle length 45 mm. Synthetic polyamide bristles. Inlet thread 1/4" female
THREADED HIGH PRESSURE PIPE NON-RETURN VALVE THREADED HIGH PRESSURE PIPE NON-RETURN VALVE

€4.50 (tax excl.)
€5.45 (tax included)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
UNIVERSAL GREASE LUB-KA-S-01 UNIVERSAL GREASE LUB-KA-S-01

€34.50 (tax excl.)
€41.75 (tax included)
Universal LUB-KA-S-01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 50 bar. For Lubricus-S For general lubrication Temperature -30º / 120ºC. Volume 250 cm³ Weight without lubricant...
LUBRICUS FOOD GREASE LUB-KA10 LUBRICUS FOOD GREASE LUB-KA10

€53.60 (tax excl.)
€64.86 (tax included)
NSF H1 reg food Lubricationcartridge No. 138985 Al thickener. Mineral oil base. Pressure 70 bar Temperature -20º / 160ºC. Volume 400 cm³ For NLGI Class 1 oils and greases Minimum distribution volume 0.15 cm³ Volume...

Menu

Please sign in first.

Sign in