Click for more products.
No produts were found.
Click for more products.
No produts were found.

G-LUBE M DESICCANT FILTER

The G-Lube M desiccant filter protects industrial equipment from contamination by moisture and contaminating particles. Fluid reservoirs in hydraulic and lubrication systems are always at risk of being contaminated by unwanted harmful substances from the air. These substances cause and accelerate the oxidation of the oil. This results in changes in the properties of the oil, reduced load-bearing capacity and reduced temperature resistance. In addition, the penetration of water can lead to the formation of acid and, consequently, corrosion of the surfaces of various components.

On the other hand, frequent oil changes, machine failures and reduced equipment life increase the maintenance budget.

Technical data sheet:

  • Maximum collection capacity 160 ml.
  • Max. air flow rate 34 m³/hour
  • Max. discharge volume 682 l/min
€99.70 (tax included)
€82.40 (tax excl.)
Reference:
75350
Consult price for large quantities
Description

G-Lube M Desiccant Filter

Advantages:

  • less machine downtime
  • a longer installation life
  • time saving
  • lower fuel consumption
  • less oil changes
  • environmentally friendly silica gel
  • Silica gel volume 440 gr.

Buy online G-LUBE M DESICCANT FILTER at the best price

Product Details
75350
12 other products in the same category:
€43.70 (tax excl.)
€52.88 (tax included)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
€4.50 (tax excl.)
€5.45 (tax included)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
€118.50 (tax excl.)
€143.39 (tax included)
Double chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic...
€86.30 (tax excl.)
€104.42 (tax included)
Straight single chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear...
€18.50 (tax excl.)
€22.39 (tax included)
Short Lubricationbrush Ø25 Bristle length 15 mm. Synthetic polyamide bristles. Inlet thread 1/4" female
€53.00 (tax excl.)
€64.13 (tax included)
High performance Lubricationcartridge Li/Ca thickener Mineral oil base. Pressure 70 bar Temperature -30º / 150ºC. Volume 400 cm³ For oils and greases of NLGI class 0-1 Minimum distribution volume 0.15 cm³ Volume per...
€60.90 (tax excl.)
€73.69 (tax included)
Oil splitters distribute an even amount of lubricant to the outlet points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided into 2,...
€60.40 (tax excl.)
€73.08 (tax included)
PAO based PHS high temperature Lubricationcartridge Pressure 70 bar Temperature -40º / 160ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³...
€49.00 (tax excl.)
€59.29 (tax included)
Universal Lithium Lubricationcartridge with Mineral-based MoS2. Pressure 70 bar Temperature -30º / 140ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 -...
€46.10 (tax excl.)
€55.78 (tax included)
Universal LUB-KA01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 70 bar Temperature -30º / 120ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15...
€53.60 (tax excl.)
€64.86 (tax included)
NSF H1 reg food Lubricationcartridge No. 138985 Al thickener. Mineral oil base. Pressure 70 bar Temperature -20º / 160ºC. Volume 400 cm³ For NLGI Class 1 oils and greases Minimum distribution volume 0.15 cm³ Volume...

Menu