Click for more products.
No produts were found.
Click for more products.
No produts were found.
Filter By
Filter By
SELECT THREAD
ØTube - Thread
EXTENT
THREAD

BRASS THREADED FITTINGS

Filter By
€0.75 (tax excl.)
€0.91 (tax included)
Brass nipple It is a plumbing or piping system accessory used to join two pipe sections of the same diameter. It is cylindrical in shape and usually has a male thread at both ends. Most common applications: plumbing,...
€1.12 (tax excl.)
€1.36 (tax included)
brass sleeve It is a plumbing or piping system accessory used to join two pipe sections of the same diameter. It is cylindrical in shape and usually has a female thread at both ends. Typical uses: plumbing, heating...
€0.81 (tax excl.)
€0.98 (tax included)
Male-female brass reduction It is used in piping systems to join two pipe sections with different diameters. That is, it adapts the diameter of one pipe to another with a smaller diameter. Applications: Plumbing,...
€0.72 (tax excl.)
€0.87 (tax included)
Brass female-male supplement It is a connector used in piping systems to join two sections of pipe with a female thread at one end and a male thread at the other. Uses: plumbing, heating, pneumatics, industry....
€3.81 (tax excl.)
€4.61 (tax included)
Brass body UNE EN 12165 Hot stamping manufacturing. Manufactured according to EN 1254-1 standard
€3.43 (tax excl.)
€4.15 (tax included)
90º female-female brass bend It is a plumbing and piping system accessory. It is an elbow that allows the direction of fluid flow to be changed at a 90º angle. Both ends of the curve have a female thread and are...
€2.85 (tax excl.)
€3.45 (tax included)
Female brass cross It is a plumbing and piping system accessory. It is a cross-shaped piece that allows four pipes to be connected at the same point. The four outputs have female threads to connect to elements with...
€1.83 (tax excl.)
€2.21 (tax included)
90 degree female-female brass elbow It is used to join two sections of pipe at a 90º angle. Both connections are female type, that is, they have a threaded inner thread where a pipe or accessory with a male thread...
€2.12 (tax excl.)
€2.57 (tax included)
Brass body UNE EN 12165 Hot stamping manufacturing. Manufactured according to EN 1254-1 standard
€2.15 (tax excl.)
€2.60 (tax included)
Female brass tee It is used to join three sections of pipe in a single connection and to be able to divide or combine the flow of a fluid in different directions. Technical data sheet: Brass body UNE EN 12165 Hot...
€1.00 (tax excl.)
€1.21 (tax included)
Brass hose connector It is designed to connect a flexible hose to a rigid pipe. It ensures a tight and resistant connection between both elements, preventing leaks and guaranteeing a continuous flow of fluid. Common...
€2.43 (tax excl.)
€2.94 (tax included)
Wall gland with brass gasket and nut It is an element used in electrical and plumbing installations. It allows the safe passage of cables or pipes through a wall or partition. Applications: industry, electrical...
€0.96 (tax excl.)
€1.16 (tax included)
Male-Male Brass Reduction It is used to join two sections of pipe with different diameters, but both with male thread (external thread). Its main function is to adapt the diameter of one pipe to another of smaller...
€1.33 (tax excl.)
€1.61 (tax included)
Female-Male Reducing Supplement It is used to join two sections of pipe with different diameters. Its function is to adapt the diameter of one pipe to another of smaller diameter, guaranteeing a smooth and safe...
€0.64 (tax excl.)
€0.77 (tax included)
Brass male plug It is a fitting for plumbing and piping systems. It is used to seal the end of a pipe or fitting with a female thread. Typical applications: Plumbing, Heating, Pneumatics, Industry Technical data...
€2.00 (tax excl.)
€2.42 (tax included)
Brass extension It is a plumbing accessory used to join two sections of pipe and increase their length. It is a short brass tube with threads at both ends, allowing it to be connected to other parts of the...
€0.78 (tax excl.)
€0.94 (tax included)
Brass body UNE EN 12165 Hot stamping manufacturing. Manufactured according to EN 1254-1 standard
€5.56 (tax excl.)
€6.73 (tax included)
3-piece male-female brass link It is a connector used in piping systems to join two pipe sections with different threads (one male and one female). It is composed of three main parts: two threaded bodies (one male and...
€5.72 (tax excl.)
€6.92 (tax included)
3-piece female-female brass link It is a connector used in piping systems to join two sections of pipe with male threads, so that disassembly is possible without cutting. It consists of: two female threaded bodies and...
€14.00 (tax excl.)
€16.94 (tax included)
Teflon thread sealant is made of 100% polytetrafluoroethylene ( PTFE ), a synthetic polymer that is resistant to corrosion, aggressive chemicals and high temperatures. It is a sealant material used to create tight,...
€0.12 (tax excl.)
€0.15 (tax included)
Aluminum flat washer. Din-7603 Thickness 1.5 mm.
€0.33 (tax excl.)
€0.40 (tax included)
Nylon washer It is used as a fastening element in various applications, together with screws, nuts or bolts. Nylon is an insulating material, so washers are used in electrical applications to prevent short circuits....
€0.30 (tax excl.)
€0.36 (tax included)
Copper washer. According to DIN-7603 Malleable and ductile. Good corrosion resistance. Excellent electrical and thermal conductivity.
€215.00 (tax excl.)
€260.15 (tax included)
Copper washer. According to DIN-7603 Malleable and ductile. Good corrosion resistance. Excellent electrical and thermal conductivity. 18 measures (50/25 units per measure)
€5.00 (tax excl.)
€6.05 (tax included)
Teflon tape is a type of adhesive tape that is made from a synthetic polymer that is resistant to temperature, corrosion, and abrasion. Teflon is a non-conductive material, making it ideal for electrical applications....
Showing 1-25 of 25 item(s)

Brass threaded fittings. Buy online at the best price.

A brass fitting is a piece used in all types of applications to connect pipes safely and resistant to corrosion. These fittings are made from brass, a material that is known for its durability and strength to provide additional protection against corrosion. The UNE EN 12165 standard. They are manufactured by hot stamping.

Brass fittings are common in pneumatic, plumbing, and low-pressure hydraulic systems that transport gas or fluids, since brass is a material that meets quality and safety standards for this type of applications. They are also used in industrial and commercial applications where a robust, corrosion-resistant connection is required. They withstand a pressure of 20 bar.

These fittings are typically available in a variety of sizes and types, such as elbows, tees, unions, hose barbs, and many more, to suit specific installation needs. The thread is BSP type. Be sure to select the appropriate size and type of nickel-plated brass fitting for your specific project.

Read more

Menu