€55.25
(tax excl.)
€66.85
(tax included)
ISO III motherboard Made of aluminum. 1/2" inlet and outlet threads, 1/8" pilot
Filter By
Filter By
PNEUMATIC DISTRIBUTORS
Subcategories
€29.00
(tax excl.)
€35.09
(tax included)
1/8 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 5 mm Flow...
€77.35
(tax excl.)
€93.59
(tax included)
ISO-1 distributor ISO 5599/1 connection Flow rate 1300 l/min. at 6 bar. Working pressure 2-10 bar. Temperature -5ºC / 50ºC Aluminum body and slider.
€22.65
(tax excl.)
€27.41
(tax included)
Nominal diameter 5mm
Nominal flow at 6 bar 550 Nl/min
Max operating temperature 60°C
Max pressure 10 bar
Control pressure 2.5 ... 10 bar
Response time TRA (14): 6 ms TRR (12): 15 ms
Fluid: filtered air with or without...
€23.10
(tax excl.)
€27.95
(tax included)
1/8 valve with manual operation by 90º lever, in 3/2, 5/2 mono or bistable version, and 5/3 closed, open or pressure centers. Made entirely of technopolymer, with a reduced size, (22 mm wide) Provides a flow rate of...
€4.50
(tax excl.)
€5.45
(tax included)
T15 coils for 1/8" solenoid valves . They store energy in a magnetic field through induction using a copper wire winding. T-15 coil for 1/8" solenoid valves DIN-4365 C type connector Protection class IP-65 For Ø8...
€21.99
(tax excl.)
€26.61
(tax included)
Nominal diameter 5mm Nominal flow at 6 bar 550 Nl/min Max operating temperature 60°C Max pressure 10 bar Control pressure 2.5 ... 10 bar Response time TRA (14): 6 ms TRR (12): 15 ms Fluid: filtered air with or without...
€51.00
(tax excl.)
€61.71
(tax included)
ISO-1 distributor ISO 5599/1 connection Flow rate 1300 l/min. at 6 bar. Working pressure 2-10 bar. Temperature -5ºC / 50ºC Supplied with the electropilot. Coil and connector not included. Aluminum body and slide
€35.05
(tax excl.)
€42.41
(tax included)
Metal 90º lever distributor valve. Great performance. Available in 1/4" thread Maximum service pressure 8 bar. Admissible temperatures -5ºC / 60ºC Panelable. Lever actuation force: 3/2 ways 10N 5/2 tracks 15N 5/3 ways...
€17.27
(tax excl.)
€20.90
(tax included)
Micro plug valve indicated as a control for pneumatic maneuvers. 3/2 NC and NO function. Mechanical drive in the form of a strut, with 2 nuts for fixing to the panel. Possibility of M5 connection and lower instant...
€52.50
(tax excl.)
€63.53
(tax included)
Materials: Pilot in brass and stainless steel, operator, base and piston in POM. Aluminum alloy body, aluminum slide, stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 2700 l/min (6 bar)...
€70.61
(tax excl.)
€85.44
(tax included)
Manual valve with 90º lever operation. 1/2" thread Pressure 8 bar. Temperature -5º / 60ºC. Actuation force 15 N. Flow rate 2620 Nl/min.
€19.40
(tax excl.)
€23.47
(tax included)
Micro plug valve indicated as a control for pneumatic maneuvers. 3/2 NC and NO function. Mechanical drive by roller. Possibility of M5 connection and lower instant fitting. Applications: Pneumatic maneuvers.
€1.00
(tax excl.)
€1.21
(tax included)
Coil connector T-15 DIN-43650-C Data sheet: Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing...
€75.75
(tax excl.)
€91.66
(tax included)
ISO-1 distributor
ISO 5599/1 connection
Flow rate 1300 l/min. at 6 bar.
Working pressure 2-10 bar.
Temperature -5ºC / 50ºC
Supplied with the electropilot.
Coil and connector not included.
€4.14
(tax excl.)
€5.01
(tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
€127.50
(tax excl.)
€154.28
(tax included)
ISO-1 distributor ISO 5599/1 connection Flow rate 1300 l/min. at 6 bar. Working pressure 2-10 bar. Temperature -5ºC / 50ºC Supplied with the electropilot. Coil and connector not included.
€52.50
(tax excl.)
€63.53
(tax included)
Materials: Pilot in brass and stainless steel, operator, base and piston in POM. Aluminum alloy body, aluminum slide, stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 2700 l/min (6 bar)...
€21.70
(tax excl.)
€26.26
(tax included)
The retractable roller valve is defined as a mechanically operated pneumatic valve. It is used to control the flow of compressed air in pneumatic systems. Its distinctive feature is the inclusion of a roller that,...
€20.30
(tax excl.)
€24.56
(tax included)
1/8 - 1/4 roller-actuated mechanical valve in 3/2 and 5/2 monostable versions. Made entirely of technopolymer, with a reduced size (22 mm wide). Provides a flow rate of 800 l/min. at 6 bar. Pressure 10 bar....
€23.80
(tax excl.)
€28.80
(tax included)
The antenna actuated valve is a pneumatic valve that is manually actuated by a lever or button, commonly known as an "antenna". It is available in 3/2-way, which consists of three ports, with one input and two...
€16.80
(tax excl.)
€20.33
(tax included)
1/8" mechanically operated valve with strut, in 3/2 NC or NO and 5/2 monostable versions. Made entirely of technopolymer, with a reduced size, (22 mm wide) Flow rate 490 Nl/min at 6 bar. Pressure 10 bar. Temperature...
€22.43
(tax excl.)
€27.14
(tax included)
Manually operated 1/8 valve with handle, in 3/2, 5/2 mono or bistable version, and 5/3 closed, open or pressure centers. Made entirely of technopolymer, with a reduced size, (22 mm wide) Provides a flow rate of 490...
€15.90
(tax excl.)
€19.24
(tax included)
Micro plug valve indicated as a control for pneumatic maneuvers. 3/2 NC and NO function. Mechanical drive in the form of a strut. Possibility of M5 connection and lower instant fitting. Applications: Pneumatic maneuvers.
€21.00
(tax excl.)
€25.41
(tax included)
1/4 strut mechanical valve, in 5/2 monostable version.
Made entirely of technopolymer, with a reduced size (22 mm wide),
Provides a flow rate of 800 l/min. at 6 bar.
Max pressure 10 bar.
Temperature -5 / 60ºC
€99.40
(tax excl.)
€120.27
(tax included)
Materials: Pilot in brass and stainless steel, operator, base and piston in POM. Aluminum alloy body, aluminum slide, stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 2700 l/min (6 bar)...
€29.73
(tax excl.)
€35.97
(tax included)
1/4 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 8 mm Flow...
€30.00
(tax excl.)
€36.30
(tax included)
1/8" handle control distributor Functions of 3/2 and 5/2 The return is carried out pneumatically or also by the handle itself. Flow rate at 6 bar 550 Nl/min. Working temperature -10ºC / 60ºC Valve pressure 0.9 - 10...
€21.03
(tax excl.)
€25.45
(tax included)
Micro plug valve indicated as a control for pneumatic maneuvers. 3/2 NC and NO function. Mechanical drive by retractable roller. Possibility of M5 connection and lower instant fitting. Applications: Pneumatic maneuvers.
€18.75
(tax excl.)
€22.69
(tax included)
Simple ISO I motherboard It is a fundamental component in pneumatic systems, specifically designed to serve as a basis for the construction of more complex pneumatic circuits. It acts as a support where various...
€5.60
(tax excl.)
€6.78
(tax included)
T22 coils for application in 1/4" and 1/2" solenoid valves Available in the most common voltages 12VDC - 24VDC - 110VAC - 220VAC - 24VAC Protection IP-65 Connector according to DIN-43650 B Power 3W DC 5VA AC Diameter...
€41.30
(tax excl.)
€49.97
(tax included)
Pneumatic pedal 5/2 spring return (monostable) Flow rate 550 Nl/min Max pressure 10 bars . Temperature -10 / 50ºC. Shared escape. Weight 0.95 Kg.
€25.00
(tax excl.)
€30.25
(tax included)
Small 3/2 pneumatic micropedal. Return by dock They have an M5 or direct connection to a Ø 4 tube. Flow rate 75 Nl/min. Temperature -10 / 50ºC Weight 0.16 Kg.
€19.40
(tax excl.)
€23.47
(tax included)
Micro plug valve indicated as a control for pneumatic maneuvers. 3/2 NC and NO function. Mechanical drive in the form of a key. Possibility of M5 connection and lower instant fitting. Applications: Pneumatic maneuvers.
€22.50
(tax excl.)
€27.23
(tax included)
ISO I base plate bottom outlet It is a variant of the standard ISO I base plates, designed specifically for those pneumatic circuits where the compressed air outlet connections are required to be located at the bottom...
€48.00
(tax excl.)
€58.08
(tax included)
5/2-way pedal-operated valve. 1/4" thread Made with a sturdy yellow or blue plastic frame. Working temperature 0º / 60ºC. Max working pressure 8 bar.
€1.00
(tax excl.)
€1.21
(tax included)
T-22 coil connector DIN-43650-B
It is an industrial electrical connector, primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device.
Applications: packaging...
€22.50
(tax excl.)
€27.23
(tax included)
Associable ISO I motherboard
It is used in pneumatic systems to build more complex and personalized circuits. Associative plates offer greater flexibility in the configuration and connection of pneumatic components....
€24.00
(tax excl.)
€29.04
(tax included)
3/2-way microvalve Normally closed.
Operation by sustained lever.
M5 thread
Panelable Ø12
Supplied with 2 nuts for fixing.
Flow rate 90 Nl/min.
Temperature -10 / 60ºC
Pressure 2 - 10 bar.
Weight 60 gr.
€4.14
(tax excl.)
€5.01
(tax included)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....
€3.75
(tax excl.)
€4.54
(tax included)
Base plate gasket ISO I 5599/1 Supplied with 4 DIN912 screws.
€11.20
(tax excl.)
€13.55
(tax included)
Aluminum multiple base for housing 1/8 - 1/4 series control valves It has centralized threaded inlet and discharges. Up to 10 positions . Supplied with gaskets and fixing screws.
€58.10
(tax excl.)
€70.30
(tax included)
1/2" electropneumatic distributor to generate movements to pneumatic cylinders. Aluminum alloy body, aluminum slider, Stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 3150 nl/min (6 bar)...
€39.90
(tax excl.)
€48.28
(tax included)
1/4, 1/2" AND 3/4" rotary valve in 4/2 and 4/3 versions with interlock and closed or open centers. Made of aluminum. Does not include the panel fixing nut. Temperature -5 / 60ºC. Max pressure 10 bar.
Showing 1-44 of 67 item(s)
Pneumatic distributors. Buy tire distributors online.
Pneumatic distributors are mechanical devices that direct and regulate the movement of compressed air; They govern the exit and entry, closing or enabling, direction and flow of compressed air, in all its devices or peripherals. They are usually pneumatic cylinders
Types of pneumatic distributors
The types of pneumatic distributors could be selected from:
- Position or direction control distributor (distributors) These valves control the direction and diversion of air to the associated elements. Start and stop.
- Distributor or flow valve. Also called flow control valve. Their mission is to regulate the speed of the pneumatic cylinder, regulating the flow of compressed air.
- Distributor or pressure control valve. Its main function is to protect other elements of the electrical circuit from overpressures. Therefore, if they detect a high pressure in the circuit, reaching the maximum level, it will cut off the air flow. In this way, by cutting and opening the air flow, it is possible to constantly stabilize the pressure of the pneumatic circuit.
How pneumatic and parts distributors work
A distributor valve consists of two parts, completely differentiated. One would be the body, the so-called distributor, and the pilot or drive. The body consists of a casing or box, normally made of aluminum that houses a slider or clapet inside, which are responsible for distributing the compressed air from one path to another.
The piloting is the way we change the inner slide. There are several types:
- Pneumatic, through a compressed air signal, makes the slider or internal clapper move
- Electric. A coil with alternating or direct current causes a magnetic field and moves the internal slider or clapper.
- Manual, The movement of the slide or clapet is carried out manually
- Mechanics. Made by mechanical elements, such as pulleys, antennas, limit switches, stops, pivots, etc.
They are simple elements and easy to assemble. It requires little maintenance and is economical to install. Long durability, changing the gasket kit.
To identify each valve or distributor and the type of actuation, a universal symbology has been applied that determines it.
Pneumatic distributors are safe, do not have explosive characteristics or produce excessive heat. The compressed air used to move the pneumatic cylinders does not generate water hammer, which reduces breakdowns or damage to the equipment. They are used in practically all types of industries, where automation is present.
