Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
Filter By
Filter By
DIAMETERS
DIAMETER x STROKE

PNEUMATIC CYLINDER FIXINGS

Filter By
SHAFT BALL ISO-15552

SHAFT BALL ISO-15552

€5.75 (tax excl.)
€6.96 (tax included)
Manufactured according to DIN ISO 12240-4 K SERIES (DIN 648-K) standard Self-locking, maintenance-free. Reduced clearance increase during operation. Possibility of operation in contact or immersed in oil. Operating...
PNEUMATIC CYLINDER ISO-6432

PNEUMATIC CYLINDER ISO-6432

€24.55 (tax excl.)
€29.71 (tax included)
ISO-6432 double-acting pneumatic cylinder with elastic cushioning. It is ideal for demanding applications that require a small, compact and precise cylinder. These cylinders, with a small, round profile, produce...
STEM FORK ISO 15552

STEM FORK ISO 15552

€3.60 (tax excl.)
€4.36 (tax included)
Cylinder fork ISO-15552 Used for rotation movements in the stem part. Manufactured according to DIN 648-K – ISO 6126 standard Coupling: STEEL
ISO-6432 SINGLE EFFECT RETRACTED STEM CYLINDER

ISO-6432 SINGLE EFFECT RETRACTED STEM CYLINDER

€26.29 (tax excl.)
€31.81 (tax included)
ISO-6432 single-acting cylinder with retracted rod It is a pneumatic linear actuator that converts compressed air energy into linear mechanical motion. It only exerts force in one direction. Technical data sheet: Stem...
ISO-6432 STAINLESS STEEL CYLINDER

ISO-6432 STAINLESS STEEL CYLINDER

€73.01 (tax excl.)
€88.34 (tax included)
ISO 6432 stainless steel cylinder Double effect provided with magnetic detection. The stem is made of Inox-316 The jacket is made of 304 stainless steel. Pressure 10 bar. Service temperature -20ºC / 80ºC Polyurethane...
STRAIGHT BALL JOINT ISO 15552

STRAIGHT BALL JOINT ISO 15552

€24.44 (tax excl.)
€29.57 (tax included)
Coupling for joining cylinder rods and machine components. It allows radial and angular deviations ensuring the longevity and smoothness of operation of the elements joined by the self-aligning joint. Construction of...
ISO-6432 CYLINDER ADJUSTABLE DAMPING

ISO-6432 CYLINDER ADJUSTABLE DAMPING

€51.18 (tax excl.)
€61.93 (tax included)
ISO-6432 cylinder with adjustable damping It is a pneumatic linear actuator with ISO-6432 standard that incorporates a mechanism to adjust the speed at which the stem stops at the end of its stroke. It is useful in...
COMPENSATING BALL ALIGNMENT ISO 15552

COMPENSATING BALL ALIGNMENT ISO 15552

€21.56 (tax excl.)
€26.09 (tax included)
Alignment compensating ball joint. Prevents breakage of the cylinder rod in case of misalignment. Made of galvanized steel. Steel ball joint and bearing. Angular movement 10º Radial tolerance up to 2 mm. Selection by...
MP2 FEMALE SWING FIXATION

MP2 FEMALE SWING FIXATION

€7.79 (tax excl.)
€9.43 (tax included)
Based on the standard -ISO 15552 (until now also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) Corrosion resistance class KBK -2 Ambient temperature -40 / 150 °C RoHS compliant Made of die-cast aluminum Zinc plated...
BALL JOINT STEM ISO-6432

BALL JOINT STEM ISO-6432

€5.75 (tax excl.)
€6.96 (tax included)
ISO-6432 rod end It is a mechanical component specifically designed to connect the rod of an ISO-6432 pneumatic cylinder to other elements of a machine or system. Its main function is to allow angular movement of the...
MALE SWING FIXATION

MALE SWING FIXATION

€7.64 (tax excl.)
€9.24 (tax included)
Based on the standard -ISO 15552 (until now also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) Corrosion resistance class KBK -2 Ambient temperature -40 ... 150 °C RoHS compliant Made of die-cast aluminum Zinc plated...
FORK STEM ISO-6432

FORK STEM ISO-6432

€2.88 (tax excl.)
€3.48 (tax included)
Fork stem ISO-6432 It is specifically used in pneumatic cylinders that comply with ISO-6432. It is attached to the end of the cylinder rod to connect the cylinder to other elements of a machine or system. Typical...
ISO-6432 SQUARE

ISO-6432 SQUARE

€3.45 (tax excl.)
€4.17 (tax included)
90º square to mount on ISO-6432 series cylinders Square to mount ISO-6432 cylinders. MS3 Made of steel.
MALE OSCILLATING REAR FIXATION 90

MALE OSCILLATING REAR FIXATION 90

€7.79 (tax excl.)
€9.43 (tax included)
Male swing rear bracket 90 Its function is to connect the cylinder to a structure or support in such a way that it allows angular movement. Applications: Industrial automation, Agricultural machinery, Medical...
ISO-6432 INOX OSCILLATING REAR FIXING

ISO-6432 INOX OSCILLATING REAR FIXING

€16.89 (tax excl.)
€20.44 (tax included)
Oscillating fixing for ISO-6432 cylinder Supplied with the pin. Manufactured in I-304. possibility on I-316
ISO-6432 STAINLESS STEEL SQUARE

ISO-6432 STAINLESS STEEL SQUARE

€10.31 (tax excl.)
€12.48 (tax included)
ISO-6432 cylinder square To be placed on the front and back of the cylinder. Made in I-304. Possibility on I-316
STAINLESS STEEL ISO-6432 SHAFT BALL

STAINLESS STEEL ISO-6432 SHAFT BALL

€17.50 (tax excl.)
€21.18 (tax included)
Manufactured according to DIN ISO 12240-4 K SERIES (DIN 648-K) Inox 304 Self-locking, maintenance-free. Reduced clearance increase during operation. Possibility of operation in contact or immersed in oil. Operating...
90º STEEL OSCILLATING REAR FIXING

90º STEEL OSCILLATING REAR FIXING

€50.89 (tax excl.)
€61.58 (tax included)
Based on ISO 15552 (until now also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) Corrosion resistance class KBK -2 Working temperature -40 ... 150 °C RoHS compliant Made of steel.
FRONTREAR PLATE

FRONTREAR PLATE

€2.88 (tax excl.)
€3.48 (tax included)
Front/rear plate for ISO-6432 MF8 cylinder Made of steel
STAINLESS STEEL ISO-6432 STEM FORK

STAINLESS STEEL ISO-6432 STEM FORK

€10.50 (tax excl.)
€12.71 (tax included)
Cylinder stem fork ISO-6432 stainless steel Based on ISO 6432, UNI 10290 Ambient temperature -40 / 200 °C Manufactured in Stainless Steel-304
PIN FOR SWING FIXINGS

PIN FOR SWING FIXINGS

€1.98 (tax excl.)
€2.40 (tax included)
Pin for oscillating fixings. Supplied with seeger rings. Made of steel.
OSCILLATING REAR FIXATION

OSCILLATING REAR FIXATION

€5.18 (tax excl.)
€6.27 (tax included)
Rear swing mount for ISO-6432 MP3 cylinder Supplied with pin and seeger rings.
BOTTOM NUT

BOTTOM NUT

€2.88 (tax excl.)
€3.48 (tax included)
Bottom nut. To be placed in ISO-6432 cylinders. Made of steel.
SQUAD (UNITARY)

SQUAD (UNITARY)

€4.43 (tax excl.)
€5.36 (tax included)
Corresponds to the standard -ISO 15552 (until now also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) Corrosion resistance class KBK -2 Ambient temperature -40 ... 150 °C Free of copper and PTFE Made of zinc plated...
CNOMO STEM FORK

CNOMO STEM FORK

€6.90 (tax excl.)
€8.35 (tax included)
Fork for CNOMO series cylinders Made of steel.
CNOMO PCN TRUNNS

CNOMO PCN TRUNNS

€45.71 (tax excl.)
€55.31 (tax included)
Trunnions for CNOMO intermediate hinge Made of steel, bronze bushing.
CNOMO PCN FLAT FLANGE

CNOMO PCN FLAT FLANGE

€20.19 (tax excl.)
€24.43 (tax included)
Flat flange for CNOMO cylinder Made of steel.
MALE HINGE 90º CNOMO RP107P

MALE HINGE 90º CNOMO RP107P

€15.53 (tax excl.)
€18.79 (tax included)
90º male hinge CNOMO RP107P It is a fixing used in pneumatic cylinders, designed to connect the cylinder to other components of a system in a flexible manner. It is attached to the pneumatic cylinder by means of a...
MALE HINGE CNOMO PCN

MALE HINGE CNOMO PCN

€13.21 (tax excl.)
€15.98 (tax included)
Rear joint for CNOMO cylinder Made of aluminum.
FEMALE HINGE CNOMO PCN

FEMALE HINGE CNOMO PCN

€14.66 (tax excl.)
€17.74 (tax included)
Hinge fixing for CNOMO cylinder Made of aluminum.
CNOMO PCN HIGH SQUAD

CNOMO PCN HIGH SQUAD

€12.94 (tax excl.)
€15.66 (tax included)
CNOMO high cylinder square Made of aluminum.  
CNOMO PCN LOW SQUAD

CNOMO PCN LOW SQUAD

€7.21 (tax excl.)
€8.72 (tax included)
CNOMO PCN low squad It is a metal accessory that is used to fix pneumatic cylinders on structures or supports. Its L-shaped design allows the cylinder to be attached to the mounting surface perpendicularly or at an...
CNOMO STEM NUT

CNOMO STEM NUT

€1.83 (tax excl.)
€2.21 (tax included)
Stem nut for CNOMO cylinder Made of steel. Select the nut based on the cylinder diameter.
STRAIGHT BALL JOINT

STRAIGHT BALL JOINT

€18.69 (tax excl.)
€22.61 (tax included)
Coupling for joining cylinder rods and machine components. It allows radial and angular deviations ensuring the longevity and smoothness of operation of the elements joined by the self-aligning joint. Construction of...
FLAT FLANGE

FLAT FLANGE

€10.25 (tax excl.)
€12.40 (tax included)
Corresponds to the standard -ISO 15552 (until now also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) Corrosion resistance class KBK -2 Ambient temperature -40 ... 150 °C Free of copper and PTFE Made of zinc plated...
CNOMO PCN CYLINDER

CNOMO PCN CYLINDER

€117.65 (tax excl.)
€142.36 (tax included)
CNOMO PCN pneumatic cylinder Double effect. Anodized aluminum sleeve. Fluorinated elastomer gaskets. Service temperature -10ºC / 70ºC Working pressure 10 bar Max speed 1 m/s. Do not hesitate to consult other careers...
GUIDE UNIT U BUSHINGS ISO-6432

GUIDE UNIT U BUSHINGS ISO-6432

€182.39 (tax excl.)
€220.69 (tax included)
GUIDE UNIT U BUSHINGS ISO-6432 GUIDANCE UNIT: Monobloc assembly, metal body (anodized aluminum) Silver grey or black color 4 self-lubricating sintered bronze plain bushings 2 chrome-plated steel guide columns...
GUIDED UNIT H BUSHINGS ISO-6432

GUIDED UNIT H BUSHINGS ISO-6432

€168.80 (tax excl.)
€204.25 (tax included)
GUIDED UNIT H BUSHINGS ISO-6432 GUIDANCE UNIT Monobloc assembly, metal body (anodized aluminum) Silver grey or black color 4 self-lubricating sintered bronze plain bushings 2 chrome-plated steel guide columns Scraper...
CENTRAL OSCILLATING FIXATION

CENTRAL OSCILLATING FIXATION

€99.49 (tax excl.)
€120.38 (tax included)
Oscillating central fixation The central oscillating fixation is an accessory for pneumatic cylinders that allows the cylinder to be fixed and rotated at a central point. Applications: Industrial automation systems,...
Showing 1-44 of 74 item(s)

Fixings for pneumatic cylinders. Buy online at the best price.

The fixings for pneumatic cylinders are elements that are attached to the pneumatic cylinders and their fastening is a very important part for carrying out maneuvers.

Function of pneumatic cylinder fixings

The function of the fixations is to adapt in each case a movement, both linear and angular, static or dynamic fixation. all of them standardized according to ISO 21287, ISO15552, AFNOR, NF, DIN standards for total interchangeability.

Types of fixings for pneumatic cylinders

The types of fixings for pneumatic cylinders can be the standard type that comply with the ISO-6431 ISO-6432, ISO-21287, ISO-15552 VDMA and CNOMO standards, compact guided cylinders, clamping cylinders, telescopic cylinders, cylinders with hollow rod for vacuum, turning cylinders, rodless cylinders, magnetic cylinders, bellows cylinders, dosing cylinders and pneumatic clamps and their types are, squares, straight hinges, angled hinges, flanges, forks, ball joints, alignment compensators, tenon and plates.

They are manufactured in steel, cast iron and aluminum. They are simple elements and easy to assemble. It does not require maintenance and its installation is economical and has a long durability.

Read more

Menu

Please sign in first.

Sign in