Click for more products.
No produts were found.
Click for more products.
No produts were found.

NICKEL PLATED BRASS NON-RETURN VALVE

Buy custom nickel-plated brass non-return valve.

  • Nickel-plated brass body.
  • NBR gasket PN 20 bar,
  • STAINLESS STEEL spring.
  • Opening pressure 0.05 bar.
  • Temperature -10ºC / +70ºC

Buy online NICKEL PLATED BRASS NON-RETURN VALVE at the best price

€7.01 (tax included)
€5.79 (tax excl.)
SELECT THREAD
  • M5
  • 1/8"
  • 1/4"
  • 3/8"
  • 1/2"
Reference:
15010001
Consult price for large quantities
Related products
€5.00 (tax excl.)
€6.05 (tax included)
York Check Valve Brass body. NBR gasket. STAINLESS STEEL spring 302 Polyamide shutter. Temperature -20ºC / +100ºC Mounting in any position.
€11.18 (tax excl.)
€13.53 (tax included)
Hydraulic 60º cone male thread non-return valve . Q Zinc-plated steel body, internal elements in tempered steel. Opening pressure 1 bar. (other pressures, consult) Oil temperature 50ºC viscosity 30 cSt Flow rates from...
€16.33 (tax excl.)
€19.76 (tax included)
The stainless steel non-return valve is used to make a flow of liquid or gases go in one direction within a circuit and completely close the flow in the other direction. It is made entirely of STAINLESS STEEL. Data...
€11.41 (tax excl.)
€13.81 (tax included)
The High Pressure Hydraulic Check Valve is used in hydraulic systems to allow fluid to flow in one direction and prevent it from flowing in the opposite direction. Data sheet: Check valve that allows passage in one...
€28.70 (tax excl.)
€34.73 (tax included)
Single pilot non-return valve. Made of steel. Max. temperature 80ºC Maximum working pressure 300 bar.
€20.93 (tax excl.)
€25.33 (tax included)
Double pilot non-return valve. Made of steel. Conical seat. Working pressure, between 300 and 350 bar. Max temperature 80ºC
€52.50 (tax excl.)
€63.53 (tax included)
Modular non-return valve NG-6 Flow rate 35 l/min. Max pressure 250 bar Working temperature -20ºC / 70ºC
€27.05 (tax excl.)
€32.73 (tax included)
Locline non-return valve Vibration resistant Absolutely airtight Unalterable by normal chemical agents The particular design allows the tube diameter to be maintained without interference in the fluid flow. LOC-LINE...
€108.75 (tax excl.)
€131.59 (tax included)
Modular non-return valve NG-10 Flow rate 70 l/min. Max pressure 250 bar. Standard temperature -30 / 80ºC
Product Details
15010001
Reference THREAD Price Add to cart
15010004 1/8"
€5.47
15010008 1/4"
€6.77
15010012 3/8"
€14.75
15010016 1/2"
€15.14
15010001 M5
€5.79
12 other products in the same category:
€21.60 (tax excl.)
€26.14 (tax included)
INOX-316 full bore ball valve in 3 pieces. Constructed of INOX-316 CF8M microfusion steel. Gaskets and seats PTFE + 15% FV Nominal Pressure PN-63 Temperature -25ºC / 180ªC. Includes ISO-5211 plate to mount with...
€59.00 (tax excl.)
€71.39 (tax included)
Sprayer that acts as a venturi, together with pressurized air, projecting the liquid and causing a mist, where we can regulate the fan it produces. Polyamide Body Battery mounting possible. NBR gaskets M-5 threads...
€80.00 (tax excl.)
€96.80 (tax included)
Stainless steel pressure transmitter Converts a pressure signal into a 4-20 mA output 1/2" Gas thread Reduced measurements. 4-20 mA output (2 wires) Power supply 12-28 V DC DIN-43650-C electrical connector IP65...
€48.00 (tax excl.)
€58.08 (tax included)
STANDARD STAINLESS STEEL 3-WAY BALL VALVE WITH ISO-5211 PLATE. STEP "L" CONSTRUCTIONS IN STAINLESS STEEL CF8M (316) MICROFUSION. GAS THREAD DIN 2999 GASKETS AND SEATS PTFE + 15% FV PRESSURE 63 BAR TEMPERATURE -25ºC /...
€152.87 (tax excl.)
€184.97 (tax included)
Full bore Wafer type stainless steel ball valve Construction in INOX-316 Seats in PTFE+15% FV Includes ISO-5211 plate to mount on actuator. Built-in locking system. Max pressure working pressure 16 bar. PN16 Working...
€94.46 (tax excl.)
€114.30 (tax included)
Manual ball valve by lever in two pieces Inox-316 Gasket and seats in PTFE ANSI B-16.5 Flange S-150 LBS Pressure 150 pounds Temperature -30 / 180ºC Possibility of mounting actuator based on ISO-5211.
€5.40 (tax excl.)
€6.53 (tax included)
Female Male Threaded Mini Ball Valve Body and spindle in chromed brass. Teflon gasket. Working pressure -0.99 / 20 bar Temperature -20ºC / 80ºC
€12.83 (tax excl.)
€15.52 (tax included)
3-way ball valve STEP "L" with gland nut. Made of brass UNI EN 1264/12165 and polymer handle. Temperature -10ºC / 80ºC Pressure -0.99 / 10 bar.
€16.33 (tax excl.)
€19.76 (tax included)
The stainless steel non-return valve is used to make a flow of liquid or gases go in one direction within a circuit and completely close the flow in the other direction. It is made entirely of STAINLESS STEEL. Data...
€43.88 (tax excl.)
€53.09 (tax included)
NPT thread needle valve Built on I-316. Graphite packing + PTFE Blue painted aluminum steering wheel. Working pressure 210 bar. Temperature -20ºC / 250ºC
€34.80 (tax excl.)
€42.11 (tax included)
3-way brass ball valve "L" passage • Body: Chrome plated stamped brass • Ball: Polished chrome plated brass • Sealing rings: Teflon (PTFE) • Stuffing gland ring: Teflon (PTFE) • Lever: Painted stamped steel • 2 Teflon...
€6.56 (tax excl.)
€7.94 (tax included)
Brass ball valve with purge Chromed brass body. PTFE ball seal O-ring in NBR-70 Chromed brass shaft. Working pressure 0.99 / 25 Bar. Temperature -20ºC / 80ºC Manual control with purge.

Menu