Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
Filter By
Filter By
COIL/POWER
VOLTAGE/VOLUME

COILS AND CONNECTORS

Filter By
T-15 COIL FOR 1/8" SOLENOID VALVES

T-15 COIL FOR 1/8" SOLENOID VALVES

€4.50 (tax excl.)
€5.45 (tax included)
T15 coils for 1/8" solenoid valves . They store energy in a magnetic field through induction using a copper wire winding. T-15 coil for 1/8" solenoid valves DIN-4365 C type connector Protection class IP-65 For Ø8...
SOLENOID VALVE COIL C1

SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
C3 8W SOLENOID VALVE COIL

C3 8W SOLENOID VALVE COIL

€8.80 (tax excl.)
€10.65 (tax included)
Standard insulation: class “F” according to VDE 0580-0110 standard and CEI standard. Insulation on request: Class “H”. Maximum temperature: 180ºC. Construction: Fully encapsulated in 6/6 resin/nylon with fiberglass....
C4 SOLENOID VALVE COIL

C4 SOLENOID VALVE COIL

€12.85 (tax excl.)
€15.55 (tax included)
Coil for solenoid valve. Inner Ø 13 mm. Power in DC 27 W. Max. temperature 180ºC. Class H insulation Connector type DIN-4365A Possibility of ordering Voltage at 72 V DC (railways)
ELECTRONIC AUTOMATIC PURGE VALVE

ELECTRONIC AUTOMATIC PURGE VALVE

€39.00 (tax excl.)
€47.19 (tax included)
The electronic automatic purge valve programs the frequency and duration of purges using an electronic timer for condensate discharge. It works automatically and wastes less air when discharging. It adapts to any type...
ANALOG TIMER T-22 DIN 43650-B

ANALOG TIMER T-22 DIN 43650-B

€37.84 (tax excl.)
€45.79 (tax included)
Analog timer T-22 DIN 43650-B Programmable T-22 analog timer for joint use with elements that have a DIN 43650 B type connection. This type of device is applied with solenoid valves for the drainage of compressor...
ANALOG TIMER T-30

ANALOG TIMER T-30

€37.84 (tax excl.)
€45.79 (tax included)
T-30 Analog Timer It is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B but with some differences, it is used to control processes that...
ELECTRONIC TIMER T-30

ELECTRONIC TIMER T-30

€47.00 (tax excl.)
€56.87 (tax included)
T-30 ELECTRONIC TIMER. Programmable T-30 electronic timer for joint use with elements that have a DIN 43650 A or B type connection. It has a manual operation or “test” button, as well as selectors to adjust the...
T-15 COIL CONNECTOR DIN-43650-C

T-15 COIL CONNECTOR DIN-43650-C

€1.00 (tax excl.)
€1.21 (tax included)
Coil connector T-15 DIN-43650-C Data sheet: Contacts: Nut with protection for conductors. Number of poles: 2/3 + Earth. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, upon request). Fixing...
T-22 COIL CONNECTOR DIN-43650-B

T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
T-22 coil connector DIN-43650-B It is an industrial electrical connector, primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. Applications: packaging...
T-30 COIL CONNECTOR DIN-43650-A

T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
Coil connector T-30 DIN-43650-A It is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
LED T-15 DIN-43650-C CONNECTOR

LED T-15 DIN-43650-C CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
DIN-43650-C connector with LED Contacts: Nut with protection for the conductors. Number of poles: 2/3 + Ground. Contact distance: 9.4 mm. Cable entry: PG7. Lining: NBR profile (Different, on request). Fixing nut: M2.5...
T-22 AC/DC LED CONNECTOR

T-22 AC/DC LED CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon request). Fixing nut: M3 x 32....
DIN-43650-A LED T-30 CONNECTOR

DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
DIN-43650-A LED T-30 connector It is an electrical component designed for the quick and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
DIN-43650-A RECTIFIER CONNECTOR

DIN-43650-A RECTIFIER CONNECTOR

€12.00 (tax excl.)
€14.52 (tax included)
Rectifier connector T:30 DIN-43650 form A. Transforms alternating current to direct current Contacts: Nut with protection for conductors. Number of poles: 2 + Earth Possibility of supplying with LED Contact distance:...
T30 CONNECTOR BASE

T30 CONNECTOR BASE

€1.20 (tax excl.)
€1.45 (tax included)
3 pin + ground connection Conductive thread max. 1 mm²
T-15 CONNECTOR BASE

T-15 CONNECTOR BASE

€1.08 (tax excl.)
€1.31 (tax included)
3 pin + ground connection Conductive cable max. 0.75 mm² DIN C
Showing 1-18 of 18 item(s)

Menu

Please sign in first.

Sign in